T-Systems International - North America

Select the application rate needed to leach minerals from the particular ore you are using. Selecting an application rate will help determine the correct T-Tape emitter spacing and flow rate for your operation.

APPLICATION RATES

Gallons per minute per square foot

24 INCHES BETWEEN LATERALS
		Emitter spacing (inches)
Emitter GPH	12	18	24	30	36
0.50	0.0042	0.0028	0.0021	0.0017	0.0014
1.00	0.0083	0.0056	0.0042	0.0033	0.0028
2.00	0.0167	0.0111	0.0083	0.0067	0.0056


30 INCHES BETWEEN LATERALS
		Emitter spacing (inches)
Emitter GPH	12	18	24	30	36
0.50	0.0033	0.0022	0.0017	0.0013	0.0011
1.00	0.0067	0.0044	0.0033	0.0027	0.0022
2.00	0.0133	0.0089	0.0067	0.0053	0.0044


36 INCHES BETWEEN LATERALS
		Emitter spacing (inches)
Emitter GPH	12	18	24	30	36
0.50	0.0028	0.0019	0.0014	0.0011	0.0009
1.00	0.0056	0.0037	0.0028	0.0022	0.0019
2.00	0.0111	0.0074	0.0056	0.0044	0.0037

Liters per hour per square meter

60 CM BETWEEN LATERALS
		Emitter spacing (cm)
Emitter LPH	30	45	60	76	91
1.9	10.56	7.04	5.28	4.17	3.48
3.8	21.11	14.07	10.56	8.33	6.96
7.6	42.22	28.15	21.11	16.67	13.92


76 CM BETWEEN LATERALS
		Emitter spacing (cm)
Emitter LPH	30	45	60	76	91
1.9	8.33	5.56	4.17	3.29	2.75
3.8	16.67	11.11	8.33	6.58	5.49
7.6	33.33	22.22	16.67	13.16	10.99


91 CM BETWEEN LATERALS
		Emitter spacing (cm)
Emitter LPH	30	45	60	76	91
1.9	6.96	4.64	3.48	2.75	2.29
3.8	13.92	9.28	6.96	5.49	4.59
7.6	27.84	18.56	13.92	10.99	9.18

-Application Rates
-ProDesigner
-Product Catalog
-Photo Gallery

Privacy Statement / Disclaimer